WOOD DOORS - Detail Notes

• All pieces must be ordered net size only, Width x Height! (Millimeters or Inches accepted).
• All doors and drawer fronts are manufactured to the nearest 1/16".
• Paint grade material is sound with no regard for color match, and all natural defects are acceptable as long as they are sound. Putty fill is also acceptable.
• Recessed panel door means the door has an approximate ¼" Ply panel.
• No guarantee on solid Drawer Fronts against cracking and warpage if they are greater than 33" Wide or 10" High.
• Most solid 5-Piece Drawer Fronts have a 6" minimum height requirement. See door styles for minimums.
• Maximum door size 30" x 72".
• Center rail is required at 48" and above.
• Center rail required on glass doors at 66" and above.
• Maximums can be exceeded with no guarantee and a possible additional charge.
• For larger stiles and rails on select doors call your representative for pricing.

WOOD DOORS - Guarantee
Doors and drawer fronts within our maximum or minimum sizes are guaranteed against warpage, swelling or twisting by the manufacturer for one year, when given reasonable treatment.

Reasonable treatment requires that doors and drawer fronts:

• Be stored in areas not subject to abnormal heat, cold, dryness, humidity, or direct sunlight.
• Not be stored in freshly plastered buildings or damp and humid open areas.
• Not be subject to extreme moisture (bleaching etc.).
• Not be subject to impairment of structural strength when fitting or applying hardware.
• Be finished on front, back, top, bottom, and sides with an equal amount of finish, as soon as possible, to aid in the prevention of unequal absorption or release of moisture. Particularly important with Maple product as it is prone to moisture, especially in areas with humid conditions and in the winter.

Guarantee Reminders:

• A warp or twist of 3/16 of an inch or less is not considered a defect. Twists are measured by placing the face of the door against a true plane surface.
• Any requested variations from our normal construction specifications are not guaranteed.
• Doors and drawer fronts must be inspected upon receipt by our customer.
• All guarantee claims must be inspected by an authorized Lindsey Doors representative prior to applying finishes or taking corrective steps.

The warranty covers replacement or repair of doors or drawer fronts in an unfinished state and in good condition as originally delivered from our factory. Our liability under this warranty is limited to the net invoice price of the doors as sold by us. There are no other warranties of any kind, expressed or implied.